General

A. Locker Nominal Dimensions (Door thickness is additional to the depth):

Width (in inches): 12, 15, 18, 21, 24
Depth: 12, 15, 18, 21, 24
Height: 60, 72, 84

B. Assembly:

Factory assembled or knocked down for field assembly

C. Standard Configurations for 72" tall locker:

1 Door: 1 fixed shelf above 2 coat hooks, keyed lock, number plate
2-3 Doors: 2 coat hooks, keyed lock, number plate
4-6 Doors: keyed lock, number plate
2-Door Z: (available in wood veneer or laminate) 1 coat hook, keyed lock, number plate

D. Handle & Lock Placement:

Factory located
Field Installed

E: Materials:

As noted below
Fire and moisture resistant materials available

F. Submittals

Shop drawings showing individual locker construction, materials & dimensions will be provided for sign-off approval

Interiors

A. Sides, Shelves, Partitions:

3⁄4" thick, 45 pound density, industrial grade particle board core, white melamine, both faces

B. Back:

1⁄2" thick, 45 pound density, industrial grade particle board core, white melamine, both faces
Recessed 3/8”

C. Case Edges:

Front Edge: PVC or Veneer, bottom and back edges unfinished

D. Venting Recess:

Top, bottom and horizontal partitions; 3/8”

Doors

A. Number of Doors: 1 – 6 and 2-Door Z

B. Reveal: 1/8”

C. Style / Material:

High Pressure Laminate

Core: 3⁄4" thick, 45 pound density industrial grade particle board core, decorative high pressure laminate face, balancing backer

Wood Veneer:

Core: 3⁄4" thick, 45 pound medium density fiberboard laminated on both sides with A-1 grade wood veneer

Edges: PVC or Veneer

Clear Coat: Two coats of clear catalyzed lacquer on all veneer surfaces, scuff sanded between coats

Stain: Stain formulation must be clearly documented to describe materials, suppliers and mixing ratios

Wood Raised Panel

Framing: 3⁄4" thick select solid wood stiles and rails, 2-1/4" wide, typical

Panels: Solid Wood or Veneer Composite Center

Profile / Style: Square raised panel with radius edges, 50/50 split with center rail for doors over 42" long, louver and other styles available

Clear Coat: Two coats of clear catalyzed lacquer on all surfaces, scuff sanded between coats

Stain: Stain formulation must be clearly documented to describe materials, suppliers and mixing ratios

Edges: PVC or Veneer

Base

A. Platform Base (Ladder Base):

Field installed and/or fabricated, plywood or lumber (decorative kick trim available)

B. Nominal Dimensions:

Unassembled Ladder Base Kit – 3/4" x 96" x 3⁄4" Plywood

Hardware

A. Hinges:

Mounted right or left (right typical)
Blum European style clip hinge with separate base plate, 120 degree opening, adjustable in all planes of operation
Two hinges on doors up to 42" long, three hinges on doors that exceed 42" long
Nickel finish

B. Locks (Field Installed):

Cam Lock:
Key is not captive in unlocked position. Two keys supplied per lock, two master keys supplied per job.

Cam Padlock Hasp:
Surface mounted for owner supplied locks.

Master Lock Brand Keyed Combination Lock:
Three number combination, five changeable combination choices, two master keys supplied per job

Digilock Brand Electronic Lock:
Available with keypad combination, coin, token or card swipe activation

C. Coat Hooks:

Two single-prong chrome or brass per opening, side mounted in compartments that exceed 30" in height
One single-prong in 2-Door Z per opening

D. Number Plates (Field Installed):

1"x 2" chrome or brass with black numbers, factory located with pre-drilled holes, field installed with black fasteners

Optional Features

A. End Panels:

Style / Material (More information at Wood lockers and Laminate Lockers):
High Pressure Laminate
Wood Veneer
Wood Raised Panel

B. Corner Top Filler Panel:

27"x 27" Melamine (field supplied mounting hardware and cleats)

C. Filler Panel:

12" wide by the specified height of the locker
Available in matching laminate or wood veneer

D. Sloped Top:

Available in Laminate & Wood Veneer only
1" deeper than the locker depth to allow for a 6" rise in back (field supplied mounting hardware and cleats)
Available in 8 ft sections

E. Vertical Corner Filler:

Field fabricated “L" from 12" wide filler panels as described above

Optional Accessories

Installation

Lockers shall only be installed in an environment with climate control and stabilized humidity levels. Do not expose lockers to extreme changes in temperature or humidity. Do not install or store in building until concrete, masonry and drywall work is fully cured and dry.
Installation information